DESCRIPTION: A high quality/ high solids putty designed to fill usual surface roughness, imperfections and ripples. It dries to a hard sandable film within two to three hours of application.
USES: To fill interior cement/ plaster surfaces. May also be used to fill wall board and wood surfaces.
COMPOSITION: Based on a special blend of binders and fillers.
MIXING RATIO: Single pack, ready for use.
COVERING CAPACITY: 3- 4 m2 / per kg.
FILM THICKNESS: 40-50 microns.
NUMBER OF COATS: Two to three depending upon the surface roughness.
DRYING TIME: Surface dry 30 mins
Sandable 2 hours
Recoatable 2 to 3 hours
APPLICATION: Normal putty applicator.
COLOUR: White (Special colors may be arranged, on request).
GLOSS: Dead Matt.
PACKING SIZE: 20 kg pack.
PROCESS AND APPLICATION
Ensure that the surface is dry right through and free from efflorescent salts. Remove all loose and friable material by using a rubbing stone and sand paper and dust off. Apply a sealing coat of Gobi’s wall sealer and dry over night. Apply two to three coats of Gobi’s Sona Wall Putty allowing two to three hours drying between coats. To ensure high quality surface evenness dry scuff with a suitable sand paper and dust off before finishing with Gobi’s Plastic Emulsion.
Remove all loose and friable material. White washed and distemper coated surfaces must be completely scraped. Apply a sealing coat of Gobi’s Wall Sealer and dry over night. Spot fill all uneven and rough areas with Gobi’s Sona Wall Putty. The puttied areas must be over coated with a thin coat of Gobi’s Wall Sealer to ensure a uniform finish of subsequent coats of Gobi’s Plastic Emulsion.