GOBI’S SYNTHETIC CLEAR VARNISH

An air drying high clarity varnish for use on wood and metal surfaces. It improves gloss, if added to enamels. Provides a tough, flexible and hard wearing finish.

Category:

Description

Want create site? Find Free WordPress Themes and plugins.

DESCRIPTION:                                   An air drying high clarity varnish for use on wood and metal surfaces. It improves gloss, if added to enamels. Provides a tough, flexible and hard wearing finish.

 USES:                                                   It can be used on all wood and metal surfaces including furniture, doors, windows etc.

 

COMPOSITION:                                Synthetic resin medium.

MIXING RATIO:                                 Single pack, ready to use.

COVERING CAPACITY:                   14-16 m2 / litre per coat on non porous surfaces.

FILM THICKNESS:                             20-25 microns per coat.

NUMBER OF COATS:                       2-3

DRYING TIME:                                   Surface dry         4 hours

Recoatable         16 hours

Hard Dry              24 hours

APPLICATION:                                   Brush, or conventional spray.

THINNER:                                            Mineral turpentine/white spirit.

FLASH POINT:                                    340 C

COLOUR:                                             Clear

GLOSS:                                                 High

PACK SIZE                                            0.75 & 3 Liters

 

 

 

PROCESS AND APPLICATION

New Surfaces

Clean the surface by rubbing with sand paper and remove dirt. Wipe clean with a solvent soaked rag.

Old surfaces

For previously varnished surface, clean up with soap and damp cloth to remove dirt, grease, wax polish etc. Rub down smooth with any suitable sand paper. Remove all poorly adhering varnish back to a firm edge by careful scraping. If the existing varnish is badly crazed, flaking or otherwise in poor condition, completely remove it to a firm edge.

Finishing

Apply 2-3 coats by brush or spray allowing 24 hours drying between coats.  Any defects should be removed by using sand paper when the previous coat is dry. To thin for spraying add upto 20% good quality mineral turpentine/white spirit to Gobi’s synthetic clear varnish.

Did you find apk for android? You can find new Free Android Games and apps.

Sparco Color Collection

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *