A high quality undercoat which provides adhesion to wood and steel surfaces, with good scratch filling properties. Can be over coated with synthetic enamels, automotive lacquers and hammertone finishes.
DESCRIPTION: A high quality undercoat which provides adhesion to wood and steel surfaces, with good scratch filling properties. Can be over coated with synthetic enamels, automotive lacquers and hammertone finishes.
USES: Doors, cabinets, windows, fans, vehicles, etc.
COMPOSITION: Based on synthetic resin and durable pigments.
MIXING RATIO: Single pack, ready to use after thinning with mineral turpentine/ white spirit.
COVERING CAPACITY: 12-14 m2 / litre per coat.
FILM THICKNESS: 25-30 microns per coat.
NUMBER OF COATS: Two
DRYING TIME: Surface dry 15-20 Mins
Recoatable 8-16 hours
Hard dry 24 hours
APPLICATION: Brush or conventional spray.
THINNER: Mineral turpentine / White spirit.
FLASH POINT: 340 C.
COLOUR: White and light grey.
GLOSS: Slight sheen.
PACKING SIZE: 0.91, 3.64, 14.56 Litres.
PROCESS AND APPLICATION
All surfaces must be properly prepared before painting can begin. Surface should be sound, free from dirt, grease and other unwanted materials. An appropriate primer may be applied, if needed.
Apply two coats of Gobi’s Synthetic Undercoat, allow 6 – 8 hours drying between coats. The undercoat should not be left uncoated for a long period as it is highly pigmented and brittle and is, therefore, unsuitable for exposure. After 24 hours drying, the undercoat is wet flatted with 400 grade sand paper. The surface is wiped with petrol soaked rag before over coating.