GOBI’S WALL SEALER (Primer)

An excellent sealer for masonry, plaster and concrete surfaces. It reduces damage from alkali and salts. By sealing powdery porous surfaces, it provides greatly improved coverage of emulsion top coats.

Category:

Description

Want create site? Find Free WordPress Themes and plugins.

DESCRIPTION:                                      An excellent sealer for masonry, plaster and concrete surfaces. It reduces damage from alkali and salts. By sealing powdery porous surfaces, it provides greatly improved coverage of emulsion top coats.

USES:                                                      For all brickwork and masonry surfaces, walls, ceilings, exterior façade of buildings. To seal poor distemper and lime wash coated surfaces.

COMPOSITION:                                    Based on special binder vehicle and pigments.

MIXING RATIO:                                    Single pack, ready to use after thinning with mineral turpentine / white spirit.

COVERING CAPACITY:                        12-14 m2 per litre per coat.

FILM THICKNESS:                                 10 to 15 microns per coat.

NUMBER OF COATS:                           One.

DRYING TIME:                                      Surface Dry                           1 hour.                                                                                                                                                   Recoatable                            24 hours.

APPLICATION:                                      Brush.

THINNER:                                              Mineral turpentine/ White spirit.

FLASH POINT:                                       34o C

COLOR:                                                  Pale straw.

GLOSS:                                                   Slight sheen.

PACK SIZE:                                             0.91, 3.64, 14.56 Litres.

 

PROCESS AND APPLICATION

New Surfaces

Run down the surface with a stiff bristle brush or rubbing stone to remove any loose and friable material.  Check that the surface is thoroughly dry and free from afflorescent salts.

Old Surfaces

For previously painted surfaces especially white- washed surfaces, scraped down to bare surface and wash with spray water to ensure freedom from contaminants like grease and oil etc.

 

 

Finishing

Apply one continuous coat of Gobi’s wall sealer after thinning it with upto 10 % mineral turpentine /white spirit. Allow to dry for 24 hours. Fill all surface imperfections with Gobi’s Sona Wall Putty before over coating with Gobi’s Plastic Emulsion.

Did you find apk for android? You can find new Free Android Games and apps.

Sparco Color Collection

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply

Your email address will not be published. Required fields are marked *